That Quail Place Forum
Raising Gamebirds => Build It Yourself => Topic started by: sidelock on September 26, 2009, 11:35:50 AM
-
Can someone post a picture of a fitting used for plumbing a barrel to attach to gravity nippels system ?
-
Sidelock I dont have a picture But you can get one from gqf they have a web store.Just search gqf it will pull up.They will have most anything we will need to start up.
Chris in southwest Ga.
-
Regular tire valvestems will surprisingly well, remove the core and drill a half inch hole in the barrel or bucket then pull the valve stem through. 3/8 inch tubing between valve stems in the barrel and end of one inch PVC. The caps slip on and off for cleaning of the pipe. I have been using this system for a good while with excellent results. They cost about $1 each.
-
How do you attach the 3/8 tubing to the end of one inch PVC ?
-
A one inch slip fitting with a 3/8 hose barb.........Home Depot.....Lowes....Local Hardware.....Cutlers Supply a couple dollars finish it off with a ty-rap.
-
valve stem pulled thru 1/2 inch hole drilled in 1 inch PVC cap
-
Very clever ! Do you just slip the 3/8 hose and force it over the valve stem ?
-
Sorry, I haven't been on here lately..................YES, that's all there is to it, no clamp or anything