Website Main Page
Forum Main Page

Welcome, Guest. Please login or register.
December 11, 2024, 10:08:41 AM

Login with username, password and session length
Search:     Advanced search
Buy & Sell Gamebirds online!
Click Here for TQP Auction & Ads
42420 Posts in 6016 Topics by 2375 Members
Latest Member: jg102
* Home Help Search Calendar Login Register
+  That Quail Place Forum
|-+  Raising Gamebirds
| |-+  Build It Yourself
| | |-+  Elevated Floor Flight Pen
« previous next »
Pages: 1 2 [3] 4 5 Go Down Print
Author Topic: Elevated Floor Flight Pen  (Read 100113 times)
citypickle
Expert Member
*****

Karma: 40
Offline Offline

Posts: 153


« Reply #30 on: June 04, 2008, 04:37:24 PM »

one more
Logged

You Don't Know How You LooK Till You Get Your Picture Took
 Give Socialism A Try It's Called (Change) Pocket Change??
Jake Levi
Expert Member
*****

Karma: 100
Offline Offline

Posts: 610


« Reply #31 on: July 18, 2008, 09:20:28 AM »



Looks very good Pickle, thanks for sharing.
Logged

Jake Levi
Curran, MI

"A government big enough to give you all that you want is big enough to take all that you have".
Thomas Jefferson
Jake Levi
Expert Member
*****

Karma: 100
Offline Offline

Posts: 610


« Reply #32 on: July 18, 2008, 09:24:42 AM »


Very interesting Pickle,

how long are your pvc ?
Logged

Jake Levi
Curran, MI

"A government big enough to give you all that you want is big enough to take all that you have".
Thomas Jefferson
Pheasant Hollow Farm
Expert Contributor
Expert Member
******

Karma: 230
Offline Offline

Posts: 2855


EST. 2001 Owner/Operator Located in Slate, WV

« Reply #33 on: July 18, 2008, 11:43:17 AM »

one more


I kept mine low Budget  With PVC 2" pipe with  a flight pen with a wire floor house 15x 15x 100 pen it has worked Great for me !!! Will take Picks Tomorrow and see what everyone thinks??

I might say,  s98 and quite impressive.. 

old pen & new one just started

From this picture it looks as though you will be concreting the PVC, was this correct? What depth did you go and what was the length of pipe. I think 10-foot is the maximum, us less there was a special order on production.  What is the distance between arches, and what is your maximum height? Do you have anything connecting the top of the arches for stabilization?

Since we don't know your location, what are your snow loads figured on?

How do you enter the flight pen area? I noticed the end of the flight pen to be finished off with what looks like 4x4 posts. Is there any support for the netting for this last section? Do you have any of the wire buried?

All in all  s98 I would have went higher with the wire on the sides or had it out of site, out of mind from predators with metal roofing around the lower perimeter.


Steve
Pheasant Hollow Farm
Logged

Specializing in Manchurian Ring-necked Pheasants and Melanistic Mutant Pheasants for release, propagation and the hunting community. Licensed by the State of WV. DNR# D6-42-23-GF1
Jake Levi
Expert Member
*****

Karma: 100
Offline Offline

Posts: 610


« Reply #34 on: July 19, 2008, 07:57:27 AM »


If, they are 10' pvc, we could join two together for a higher arch, more headroom, I am thinking this could work well for a short pen, like 20'-30' . With netting could make a very economical pen.
Logged

Jake Levi
Curran, MI

"A government big enough to give you all that you want is big enough to take all that you have".
Thomas Jefferson
Little Bear Game Farm
Expert Member
*****

Karma: 27
Offline Offline

Posts: 250


Kick 'Em Up - Knock 'Em Down

« Reply #35 on: July 27, 2008, 04:37:16 PM »

Mr. Pickle, looks very nice.  I need to build a bigger flight pen in the next couple weeks but my house is for sale so I don't want to invest a whole lot and nothing permanent.  I'm thinking of stealing your design and driving 2" PVC into the ground a foot and leaving 16" stick out.  Then, putting 1 1/2" PVC into the 2" and bending it around.  I'll put 16" soffit panels around the bottom.

Did you bury the wire at all?  I am a little nervous about predators digging underneath.

Up by me, you can buy 20' lengths of PVC, but you pretty much need a trailer to haul them.  I'm going to see if you can get PVC crosses.  Then, if you had 10' lengths, you can bend them to center and put the cross in.  That will make it easier to run bracing between the arches.  However, I don't think I have seen 1 1/2" PVC crosses before. 

The other thing I am nervous about with using PVC is the winter,as Steve mentioned.  Not so much the snow load, but the brittleness of the PVC when its 20 below and then the wind starts blowing it around.  Is your pen made out of Sch 40 or is it the electrical conduit PVC?  That stuff seems to be a little more flexible than the Sch 40.
Logged

Chukar and Pheasant Propogation - Trust my advice based on the knowledge that I have not been doing this very long and don't know a lot more than I do know...  But at least I know that I don't know
DoubleL911
Expert Member
*****

Karma: 49
Offline Offline

Posts: 218

« Reply #36 on: July 27, 2008, 05:17:55 PM »

Similar designs;
We used the one from Mississippi State University.
Modified the brood house with wire floor.
Piping is 30 feet long
set at 15 feet wide this allows for a head height of 12 feet.
www.quailranch-ok.com
www.mstate.edu/dept/poultry/plans/fltplan.htm
Larry Lain
www.doublelquailfarms.com
Logged
Little Bear Game Farm
Expert Member
*****

Karma: 27
Offline Offline

Posts: 250


Kick 'Em Up - Knock 'Em Down

« Reply #37 on: August 09, 2008, 08:49:11 PM »

Here's a few pics of my cheap flight pen.  The elevated floor would have cost another $400.  10' sticks of PVC worked great and I put PVC crosses in the middle.  The PVC is 1" because I was too nervous I wasn't going to be able to bend a 2" piece around.  I put 1 1/4" PVC in the ground and silt fence around the outside; out of sight, out of mind.  Feeders were made with PVC and the waterers are nipple drinkers I had already put together for my brooder drawers which didn't work great there.  I do like having the elevated floor, but I think the birds love the natural floor so I hope it helps in their flight conditioning.
Logged

Chukar and Pheasant Propogation - Trust my advice based on the knowledge that I have not been doing this very long and don't know a lot more than I do know...  But at least I know that I don't know
Little Bear Game Farm
Expert Member
*****

Karma: 27
Offline Offline

Posts: 250


Kick 'Em Up - Knock 'Em Down

« Reply #38 on: August 09, 2008, 08:58:19 PM »

Here's finished pics...
Logged

Chukar and Pheasant Propogation - Trust my advice based on the knowledge that I have not been doing this very long and don't know a lot more than I do know...  But at least I know that I don't know
wildergamebirds
Expert Member
*****

Karma: 132
Offline Offline

Posts: 1544


« Reply #39 on: August 09, 2008, 09:45:58 PM »


  That looks great.  Can you post a close-up of the feeder base?  That could be a good way to feed in seclusion, without having to stumble around in the dark.
Logged

When nuts are outlawed, only outlaws will have nuts, look at France.
CharlieHorse
Expert Contributor
Expert Member
******

Karma: 147
Offline Offline

Posts: 2850


Northern Bobwhites

« Reply #40 on: August 10, 2008, 01:01:01 AM »

PVC pipe can be purchased in 20' lengths, usually Plumbing supply stores carry it, I don't think you'll find it at Lowes or Home Depot.

Quote
brittleness of the PVC when its 20 below and then the wind starts blowing it around

A person can heat the pipe and bend it slightly, say at the peak to reduce some of the pressure/stress on it. A heat gun, or if you're real careful with a propane torch (can leave unsightly burn marks if not careful), hold torch flame at a distance from pipe. Experiment with a scrap/disposable piece if you're not experienced with bending PVC pipe. Let cool completely before putting it under stress and don't heat it while it is under stress, and heat about a 2-3' area evenly and all of a sudden you'll be able to form it to the shape/angle you desire. One can get real creative bending the pipe, even making the sides towards the ground straight up and down if wanted and a pointed peak.

Quote
I'd hate to know how much material has went up from 2 years ago.

A BUNCH!    s16
« Last Edit: August 10, 2008, 01:13:31 AM by CharlieHorse » Logged

I pledge allegiance to the flag of the United States of America, and to the Republic for which it stands: one Nation under God, indivisible, with Liberty and Justice for all.
Little Bear Game Farm
Expert Member
*****

Karma: 27
Offline Offline

Posts: 250


Kick 'Em Up - Knock 'Em Down

« Reply #41 on: August 10, 2008, 09:50:08 AM »

Here are a couple pics of the feeder.  Its just a 5' piece of 3" PVC. Outside of the pen, I put a cap on it loosely.  On the other end, there is a 45 degree corner and then a 3" x 4" reducer.  I attached little pieces of wood to te reducer and then screwed it to a pie pan.  After one day, no problems  :?:
Logged

Chukar and Pheasant Propogation - Trust my advice based on the knowledge that I have not been doing this very long and don't know a lot more than I do know...  But at least I know that I don't know
citypickle
Expert Member
*****

Karma: 40
Offline Offline

Posts: 153


« Reply #42 on: August 10, 2008, 11:56:10 AM »

Sorry i missed this thread. The plan came from Miss.U. But i made the building 15X15 instead of 15X20 Used 20' stick of SCH 40 with the female end made on it from Plumbing Supply local 30' length of pipe for arch. Connectors don't have the depth that Bell pipe have and was afraid to use them. Pretty simple and easy. I used 1/4 wafer board & painted it,was Shocked at how much Plywood cost so I went low Budget. If it will last 2-3 years it has done the job.
  I used line post for Chainlink cut in half about 32" when cut for the ancor post for Pvc .
  Heavy plastic wire straps to hold Chicken wire & netting to pvc & 5 Gozillion Hog rings every other hole in the wire to netting. Hog rings were the Hardest part.  s176 Has worked well for me so far
Logged

You Don't Know How You LooK Till You Get Your Picture Took
 Give Socialism A Try It's Called (Change) Pocket Change??
CharlieHorse
Expert Contributor
Expert Member
******

Karma: 147
Offline Offline

Posts: 2850


Northern Bobwhites

« Reply #43 on: August 11, 2008, 08:42:52 AM »

"Little Bear"............ :-|

   Feeder looks good, but appears that there is quite a bit of waste?

Suggestion...........

1.  Cut the pieces of wood off some and lower PVC closer to pan. Leave just enough room for some feed to come out, my chicken feeders only have about a 1/4"-1/2" gap to stop spillage/waste/scratching.

2.  Change pan to something that has sides straight up and down instead of sloped.

3.  Put something under feeder to raise it off the ground to reduce/eliminate contamination and the scratching of the feed out of the feeder.

 s98
Logged

I pledge allegiance to the flag of the United States of America, and to the Republic for which it stands: one Nation under God, indivisible, with Liberty and Justice for all.
BravoSpinone
Junior Member
***

Karma: 1
Offline Offline

Posts: 15


Bella e Bravo Spinone

« Reply #44 on: January 30, 2009, 01:35:27 PM »

What are the dimensions.

Overall length x width x ht (wire to netting)

4x4 posts ctr to ctr

lumber dims? and ctrs?

thanks,

Dan

Logged

Dan
Pages: 1 2 [3] 4 5 Go Up Print 
« previous next »
 

Powered by MySQL Powered by PHP SMF 2.0.15 | SMF © 2017, Simple Machines Valid XHTML 1.0! Valid CSS!